|
|
|
| Installation Tooling Pulling Heads - Aero-Tech Fastener Supply is your source for new Cherry Aerospace Pulling Heads and Riveters that will meet all your tooling requirements. Listed below are just a few of the pulling heads we stock in our inventory. We are a Cherry Aerospace (formerly Cherry Textron) Installation Tooling Distributor. Other product lines we stock are Allfast and Huck Mfg. |
|
 |
|
|
The H701B-456 Straight Pulling Head pulls CherryMAX®,
InterMAX™ and SST™ fasteners in -4, -5, and -6 diameters
(Nominal or Oversized)
NSN: 5130-01-393-2927
Military Part Number M85188S1
|
|
|
|
The H753A-456 Right Angle Pulling Head pulls CherryMAX®, InterMAX™ and SST™ fasteners in -4, -5, and -6 diameters
(Nominal or Oversized)
NSN: 5130-01-393-2926
Military Part Number M85188S2.
|
|
|
|
|
|
|
The H781-456 Offset Pulling Head pulls CherryMAX®,
InterMAX™ and SST™ fasteners in -4, -5, and -6 diameters
(Nominal or Oversized)
NSN: 5130-01-393-2825
Military Part Number M85188S3
|
| |
|
|
The H782 Offset Pulling Head pulls CherryMAX®, CherryMAX AB™, SST™ and Avdel® MBC™ L/C fasteners in -4, -5, and -6 diameters (Nominal or Oversized)
|
|
|
|
|
|
|
The H902 Series Pulling Heads pull Nut-Plate fasteners in -3 and -4 diameters and CherryLock® "A" code fasteners in -3 diameter
|
| |
|
|
|
The H681 Series Pulling Heads fits directly on the G784 and the G689 pneumatic riveters. This series of pulling heads are capable of installing -3, -4, -5, -6 and -8 diameter CherryLOCK® fasteners
|
|
|
|
|
|
|
The H9055 Series Pulling Heads are available for installation of -3, -4, -5, and -6 diameter locked spindle CherryLOCK® 'A' code rivets in all materials, head styles and grip lengths.
|
| |
|
|
|
The H955 Series Pulling Heads fits directly on the G747, G704B and G746 pneumatic riveters. This series of pulling heads are capable of installing -3, -4, -5 and -6 diameter locked spindle CherryLOCK® 'A' code rivets in all materials, head styles and grip lengths.
|
|
|
|
|
|
|
The H513 Series Pulling heads are designed to fit on pneumatic-hydraulic rivet installation tools for installing aerospace Lockbolt fasteners. The H513 Series pulling heads are available is several styles, H513- Short Pintail, H513S- Swivel, H513SR- Swivel Self-Releasing and H513SRC- Chisel Nose Self Releasing.
|
| |
|
|
|
The H827-8 Offset Pulling head fits directly on the G744 CherryMAX® power riveter to install -8 diameter rivets in all materials and head styles.
|
|
|
|
|
|
|
The H680B200A Pulling head is designed for pulling CherryMAX® rivets on Hydroshift pneumatic-hydraulic installation tools. Fitting on the CherryLOCK® riveters directly without the use of an adapter. The H680B200A will install all -4, -5 and -6 diameter fasteners in either Countersunk or Universal head styles.
NSN: 5130-01-044-7198
|
| |
|
|
Aero-Tech also provides tool accessories for your tooling requirements.
Extensions- Available for extending the pulling heads ability to reach limited access areas.
Adapters- Permits the use of various Cherry Riveters to accept Cherry pulling heads for installation of rivets that the installation tool were not originally intended to install.
Maintenance Accessories - Air Bleeder Bottle (Part # 700A77), Service Kits for the servicing of Cherry Power Riveters consisting of O'rings and gaskets.(Example Part # G704KS)
Other Accessories- Stem Catcher Bag (#670A20), Grip Gauge (#269C3), Magnetic Anvil Catcher (#701B32) |
|
